![]() |
![]() |
![]() |
![]() |
![]() |
|
Test Category
試驗類別 |
Items, Materials or Products Tested
試驗項目、物料、或產品 |
Specific Tests or Properties Measured
特定試驗或量度的特性 |
Specification Standard Method or Technique Used
規範、標準方法或應用技術 |
|
Construction Materials |
Soil |
Determination of moisture content by oven-drying method at 105 °C ± 5 °C | GEO Report No. 36 : 1994 Test 2.3.2A |
| Determination of moisture content by oven-drying method at 45 °C ± 5 °C | GEO Report No. 36 : 1994 Test 2.3.2B | ||
| Comparative test for the determination of moisture content by oven-drying | GEO Report No. 36 : 1994 Test 2.3.2C | ||
| Determination of liquid limit by the cone penetrometer method | GEO Report No. 36 : 1994 Test 2.4.3 | ||
| Determination of plastic limit, plasticity index and liquidity index | GEO Report No. 36 : 1994 Test 2.5.3 | ||
| Determination of particle size distribution by wet sieving with dispersant | GEO Report No. 36 : 1994 Test 2.9.2A | ||
| Determination of particle size distribution by wet sieving without dispersant | GEO Report No. 36 : 1994 Test 2.9.2B | ||
| Determination of particle size distribution by the hydrometer method (with dispersant) | GEO Report No. 36 : 1994 Test 2.9.5A | ||
| Determination of particle size distribution by the hydrometer method (without dispersant) | GEO Report No. 36 : 1994 Test 2.9.5B | ||
| Construction of a continuous particle size distribution curve from the results of wet sieving and sedimentation tests | GEO Report No. 36 : 1994 Test 2.9.6 | ||
| Determination of dry density / moisture content relationship of non-crushable soils (using a 1000cc mould) | GEO Report No. 36 : 1994 Test 4.3.3A | ||
| Determination of dry density / moisture content relationship of crushable soils (using a 1000cc mould) | GEO Report No. 36 : 1994-Test 4.3.3B | ||
| Determination of dry density / moisture content relationship of non-crushable soils (using a CBR mould) | GEO Report No. 36 : 1994 Test 4.3.4A | ||
| Determination of dry density / moisture content relationship of crushable soils (using a CBR mould) | GEO Report No. 36 : 1994 Test 4.3.4B | ||
| Determination of the in situ bulk density and in situ dry density of soil by the sand replacement method suitable for fine-, and medium-grained soils (with small pouring cylinder) | GEO Report No. 36 : 1994 Test 9.2.1 | ||
| Determination of the in situ bulk density and in situ dry density of soil by the sand replacement method suitable for fine-, medium-, and coarse-grained soils (with large pouring cylinder) | GEO Report No. 36 : 1994 Test 9.2.2 |